Description Job Purpose: As a WEM Tester, you will safely pressure and/or leak test grey iron, ductile iron, steel and stainless-steel castings, while following all Work Instructions. You will be required to maintain the highest level of quality and report results accurately. Essential Duties and Responsibilities: • Assemble parts for loading on testing bench. • Visually examine parts for defects such as cracks and pin holes. • Measures results of pressure test and logs data. • Separates and marks defective parts according to job specifications and department procedures. • Files/deburrs surplus metal from parts as needed. • Accurately stamp parts after successful completion of test. • Disassembles parts after testing is complete. • Tag & move parts to staging area for storage. • Prepare proper work order/routing documentation. • Tests boilers, tanks, fittings, pipes, and similar objects to detect and locate leaks, using compressed air or water pressure: Installs fittings on object to seal outlets and connects object to high-pressure air or water line, using hand tools. • Activates air compressor or water pump until gauge registers specified internal pressure. • Observes gauge for loss of pressure indicative of leaks and examines object for escaping air or water to detect leaks. • Marks object at source of leaks for subsequent repair. • May apply soap solution to surface of object or immerse object to facilitate location of air leaks. • May test object under high pressure to ensure compliance with product safety ratings. • May be designated according to type of test used as Hydrostatic Tester; Pneumatic Tester. Requirements A. Education: High school diploma or general education degree (GED) B. Experience: 1-3 months experience in simple assembly. Experience in a metals manufacturing environment is a plus. C. Technology Aptitude/Skills: Problem solving skills necessary to deal with issues involving a few concrete variables in standardized situations. Must have ability to use basic high school math. Ability to read and interpret a tape measure required. Ability to read a machining scale a plus. D. Functional Skills: Excellent prioritization, organizational and attention to detail are important in this role. E. Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence and fill out daily labor and/or testing reports. Physical Requirements: • Ability to stand/walk on production floor for 8+ hours per day. • Ability to walk up steps and stand on top of low platform. • Ability to use hands and fingers to grasp parts, change tooling, do pushing/pulling of tools, read and record pressure gauge results, etc. • Ability to write information in a logical flow. • Ability to read and respond on an on-going basis daily due to nature of the work, throughout the day • Ability to communicate with others in person. • Ability to walk, bend, reach, climb, stoop, kneel or crouch frequently. • Ability to lift and carry 30lbs to 60lbs on occasion. • Walk: Constant (67% & more 5-1/2 hrs/day - 8 hrs/day) • Sit: Never (0 min.) • Stand: Constant (67% & more 5-1/2 hrs/day - 8 hrs/day) • Crawl: Never (0 min.) • Twist: Frequently (34-66% up to 2-1/2 hrs - 5-1/2 hrs/day) • Forward Bend: Frequently (34-66% up to 2-1/2 hrs - 5-1/2 hrs/day) • Reach forward: Constant (67% & more 5-1/2 hrs/day - 8 hrs/day) • Reach above shoulders: Never (0 min.) • Reach to side: Frequently (34-66% up to 2-1/2 hrs - 5-1/2 hrs/day) • Reach Squat/Crouch: Occasionally (6-33% up to 24 min-2-1/2 hrs/day) • Reach Kneel: Never (0 min.) • Reach Climb Stairs: Occasionally (6-33% up to 24 min-2-1/2 hrs/day) • Reach Climb Ladder: Never (0 min.) • Reach Drive: Rarely (1 - 5% up to 24 min/day) • Head/Neck Static: Occasionally (6-33% up to 24 min-2-1/2 hrs/day) • Head/Neck Rotate: Frequently (34-66% up to 2-1/2 hrs - 5-1/2 hrs/day) • Head/Neck Flex/Ext/Bending: Frequently (34-66% up to 2-1/2 hrs - 5-1/2 hrs/day) • Hand/Wrist/Forearm Fine Manipulation/Left: Frequently (34-66% up to 2-1/2 hrs - 5-1/2 hrs/day) • Hand/Wrist/Forearm Fine Manipulation/Right: Frequently (34-66% up to 2-1/2 hrs - 5-1/2 hrs/day) • Hand/Wrist/Forearm Twisting Forearm: Frequently (34-66% up to 2-1/2 hrs - 5-1/2 hrs/day) • Hand/Wrist/Forearm High Repetition: Occasionally (6-33% up to 24 min-2-1/2 hrs/day) • Grip Force Light: Frequently (34-66% up to 2-1/2 hrs - 5-1/2 hrs/day) • Grip Force Medium: Frequently (34-66% up to 2-1/2 hrs - 5-1/2 hrs/day) • Grip Force Firm: Frequently (34-66% up to 2-1/2 hrs - 5-1/2 hrs/day) Our benefits package makes a career with USEMCO an appealing opportunity. We are proud to offer our employees: • Medical, Dental & Vision Insurance • Flex Spending Account (FSA) • Employee Assistance Program (EAP) • Employer Paid Life & AD&D Insurance • Employer Paid Short- & Long-Term Disability Insurance • Supplemental Insurance • Paid Time Off (PTO) • 10 Paid Holidays • 401(k) w/Employer Match • Profit Sharing