Mechanical: • As requested and as the result of inspection tours, checks machines and equipment to see if they are operating efficiently • When machines or equipment are not functioning properly, diagnoses the cause by observation, sound or other methods based on mechanical knowledge and determines what repairs or adjustments are needed • Adjusts or changes settings of semi-complex and complex machines or assemblies involving simple or intricate adjustments • As needed, repairs machines by replacing such parts as gears, discs, cams, belts, chains, studs, guides, shafts, bushings, etc. • Makes test run and final adjustments • Partially or completely dismantles equipment to make repairs and/or adjustments and reassembles equipment Pipefitting: • Lies out and installs piping with valves, tees, nipples, drains, etc. • Measures, cuts and threads pipe as needed • Measures, cuts, bends and sweat couples copper tubing • Connects pneumatic control instruments and adjusts control valves • Packs valves, replaces gaskets, floats, washers, etc. • Diagnoses cause of trouble and make necessary repairs, adjustments, or replacements to pipelines, valves, sprinkler heads, toilets, fountains, fluid or gas lines, etc. • Estimates other than stock items needed and orders same through supervisors. Lubricating: • Lubricates the moving parts and wearing surfaces of all assigned machines, mechanical equipment, motors, etc., and regulates the quantity to be used. Removes excess grease and foreign matter • Uses specified lubricants • Follows scheduled and deviates from same when necessary • Notes any obvious equipment defects and notifies supervisor of same Utility Maintenance: • Lies out and performs general masonry work, such as, building forms and the mixing and pouring of concrete for pedestals, footings, etc. • Digs trenches and lay tile pipe, etc. • Perform miscellaneous grounds maintenance work • Makes minor floor and roof repairs Carpentry: • Makes and/or repairs benches, platforms, closets, partitions, shelves, bins, racks, etc. • Adjusts doors, and replaces locks and hinges Welding: • Regulates the flow of gas to control flame or current for proper temperature. • Performs routine welding duties involving broken or cracked parts or in the erecting and welding of small stands, etc. Skills: • Know how to check, adjust, clean, and lubricate assigned equipment • Know how to tend and operate boilers and make water tests • Know how to diagnose cause of trouble in all equipment, dismantle and repair same • Knowledge of plant layout • Know how to make plumbing and pipefitting repairs and modification Physical and Working Conditions Required: • Will be required to stand, walk, bend, climb, lift, and carry • Will be required to work indoors and outdoors • Must have good sight, touch, and hearing • Must have good manual dexterity • Must know how to operate hand and power tools common to the trade • Must be able to work under natural and artificial light Education: • High School Graduate This description because of the nature and importance of the position may not be all inclusive. Responsibilities may change as business conditions change.