Company Description Shifts: 1st (6.00 AM – 4.30 PM ) - $13/hr - $14/hr – Monday to Thursday 2nd (4.30 PM – 3.00 AM ) - $13/hr - $14/hr – Monday to Thursday Job Description • Sets up and operates slitting machine to cut sheet metal into strips of specified widths. • Selects, cleans, and installs spacers and cutters on arbors, and hones cutters with oilstone to remove nicks. • Presses button to lower arbor until cutters mesh, and measures clearance with a feeler gauge. • Inserts spacers to adjust spacing to a specified tolerance. • • Signals OVERHEAD CRANE OPERATOR to lift metal roll to play-out reel or places roll on the reel, using an overhead chain hoist. • • Threads sheeting through slitter and verify dimensions of cut to specifications, using rule. • • Secures strips on recoiler, adjusts guides and roller tension with a hand crank, and starts the machine. • • Observes slitting and rewinding operation and examines cut strips for flatness, holes, burrs on edges, and surface defects. • • May oil and clean machine. • • May feed sheet metal between rotating shear rolls. • • May install rubber sleeves over spacers to provide a gripping surface for rollers and to facilitate movement of material being slit. • • May operate panel to control specific units of equipment, such as feeder unit. Additional Information If you are looking for a change and if you are interested in this job, you can contact me for more details. Direct Number- 734-984-4499